How To Choose Thermally-broken Aluminum Doors And Windows?

Sep 07, 2024

Leave a message

1. Choose the right profile

The price of thermally-broken aluminum doors and windows is mainly distinguished by the profile. Aluminum profiles of different qualities will affect the price of doors and windows. In addition, the same thermally-broken aluminum accessories have different prices.

2. Cost analysis of thermally-broken aluminum

In addition to the above-mentioned profiles and insulation strips, the price of thermally-broken aluminum doors and windows is also affected by the number of windows, the shape of the windows, hardware accessories, waterproof sealants, etc.

In addition, the brand premium and the merchant's installation technology and after-sales service capabilities must also be considered. After all, the quality of big brands is better, and large merchants will install and provide better services.

 

aluminum doors and windows

 

Common tricks of thermally-broken aluminum doors and windows:

1. Insulation strips are inferior

Some merchants use low-cost non-structural materials, general-purpose plastics---polyvinyl chloride (PVC) insulation strips (hereinafter referred to as PVC insulation strips) to replace the glass fiber reinforced polyamide nylon (PA66) insulation strips (hereinafter referred to as nylon 66 insulation strips) that have been recognized and used in Europe for decades.

After the actual installation and use, the thermal insulation doors and windows made of the thermal insulation aluminum profile after the PVC thermal insulation strip is composited with the thermal insulation strip will cause the PVC thermal insulation strip to loosen in the thermal insulation aluminum profile, or even completely detach due to thermal expansion and contraction. In the case of light, the window will loosen and deform, thereby destroying the air tightness and water tightness of the door and window, and in the case of heavy, the window will loosen and detach as a whole.

2. Wall thickness is not up to standard

At present, there are many companies in the thermal insulation aluminum door and window engineering examples that use aluminum profiles with different wall thicknesses, especially those with a wall thickness of less than 1.4mm, as thermal insulation thermal insulation aluminum profiles.

3. Process testing is not up to standard

Generally, the door and window projects must undergo strict national performance testing agencies to conduct relevant performance testing, and the obtained test reports will be presented as the performance test reports of the finished doors and windows.

However, the test data of this raw material can only represent its material performance. The performance of the finished product produced after hot extrusion and cooling will change greatly.

4. Taking shortcuts and replacing component materials

After fully studying and understanding the significant performance differences between PVC insulation strips, domestic nylon insulation strips and imported nylon 66 insulation strips, some thermally-insulated aluminum window and door companies have adopted a compromise solution that is both economical and relatively safe: the window frame aluminum profiles use low-quality and cheap PVC or domestic nylon insulation strips, and the window sash aluminum profiles use high-quality imported nylon 66 insulation strips.

But no matter how they are replaced, they are not thermally-insulated aluminum windows and doors, but selling them to consumers at the price of thermally-insulated aluminum windows and doors is a deception.

Send Inquiry