How To Solve The Problem Of Low Hardness Of Aluminum Profiles By Aluminum Profile Processing Manufacturers?

Aug 10, 2024

Leave a message

Due to the excellent characteristics of aluminum profiles, the current application field is very wide. But what if the strength of aluminum profiles is too low? Next, let's introduce it to you in detail.

1. Setting and controlling the temperature of aluminum profiles:
Generally, there is a certain deviation between the temperature and the surface temperature. When setting the surface temperature, it should be set according to the actual temperature of the furnace, and pay close attention to the fluctuation of the temperature.

2. Aging and heat insulation of aluminum profiles:
It is necessary to strictly implement the process requirements to carry out aluminum profile processing, and the insulation time should be appropriate to avoid insufficient hardness caused by under-aging or over-aging.

3. When extruding and framing industrial aluminum profiles, they should not be too dense. There should be a gap between the materials. The spacing between industrial aluminum profiles, especially airtight materials and thick materials, should be larger. When pipe materials, small materials and plates are combined into one frame, the pipe materials should be put down, which is conducive to the exhaust of the aging circulation system.

4. When loading industrial aluminum into the furnace, other special alloys should be separated from general alloys for aging. Because the factors for manufacturing robot aluminum profiles must be aged in the same furnace, the technology of special alloys should be used for aging.

 

aluminum profile

 

The above content is some of the treatment methods for the low strength of industrial aluminum profiles that we have told you. We can pay attention to the above aspects and continuously improve our production process to produce aluminum that can better meet everyone's requirements.

Send Inquiry