How To Identify Whether It Is Inferior Aluminum Profile?
Jul 15, 2024
Leave a message
Aluminum materials are divided into raw aluminum and cooked aluminum. Raw aluminum is aluminum with an aluminum content of less than 98%. It is relatively brittle and hard, and can only be cast by sand casting. Cooked aluminum is aluminum with an aluminum content of more than 98%. It is soft and can be extruded, stretched or stamped into a variety of utensils. So
When ordering aluminum profiles, how can you identify whether it is inferior aluminum profiles?

Characteristics of inferior aluminum profiles:
1. The chemical composition of inferior aluminum profiles will be unqualified. Adding a lot of miscellaneous aluminum and waste aluminum to aluminum profiles will greatly reduce costs, but it will cause the chemical composition of architectural aluminum profiles to be unqualified, and even seriously endanger the safety of construction projects.
2. Defective aluminum profiles reduce the loss of chemical reagents and reduce costs, but the corrosion resistance of the profiles is also greatly reduced.
3. The oxide film of inferior aluminum profiles is thin. The national standard stipulates that the oxide film thickness of architectural aluminum profiles should not be less than 10um (micrometers). If the oxide film thickness of the aluminum profile is not enough, the surface is prone to rust and corrosion.
Send Inquiry




